Product Description:
RainFlo UV Disinfection System rainwater treatment and reuse systems are ideal for treating rainwater to potable* standards. The RainFlo UV Disinfection System optimizes UV disinfection efforts to disinfect rainwater in real time to bring it up to drinkable standards, as required by NSF/US EPA standards. Disinfected rainwater can be used for applications such as, flushing toilets and urinals, clothes/dish washing, industrial process water, irrigation/greenhouse, drinking water, or nearly any application where city or well water is used.
*The ability of the RF UV disinfection package to create potable quality water is dependent on incoming water quality to the system. Please refer to the RF UV system product manual for relevant incoming water quality requirements. The ability to use rainwater for potable applications varies by jurisdiction. Please check with your local authority having jurisdiction for applicable codes and guidelines for using rainwater as a source of potable water. RainHarvest systems is not responsible for incoming water quality. The suitability of the water quality produced by the RF UV disinfection package for its intended use must be verified by the system owner through regular testing.
For additional information about how to get started and/or specifying a RainFlo UV Disinfection System suitable to your application, please contact us today!
Additionally, the unit arrives with filter cartridges pre-installed. From input to output, the filter cartridges installed are a 20 micron pleated sediment filter, a 5 micron pleated sediment filter, and a 1 micron activated carbon block filter.
The unit arrives completely assembled ready for installation. Installation is a breeze. Simply mount the unit to the wall and plumb in your water supply line. The standard system is set up to have a water flow from left to right. If your installation requires the opposite direction, simply choose the Right to Left (R-L) option.
|
|
Bundle Features the Following Components:
|
Three (3) Full Flow 20" x 4.5" Filter Housings with 1" Ports
For post-treatment of rainwater collection systems, the 20" Full Flow filter housings are the preferred choice for most installations. The large housing and cartridge units offer up to 35 GPM of flow at 60 PSI and the maintenance costs for larger cartridges is much lower than replacing smaller cartridges more frequently. |
|
Full Flow Triple Filter Housing Mounting Bracket
Heavy-Duty commercial grade mounting bracket made to support (3) 4.5" diameter filter housings. Powder-coated steel. |
|
20 Micron Pleated 20" x 4.5" Filter Cartridge
More than 16 square feet of filtration surface area to maximize dirt-holding capacity and extend the time period between changes or cleaning. Can be washed with clean water to increase effectiveness and lifespan. |
|
5 Micron Pleated 20" x 4.5" Filter Cartridge
More than 16 square feet of filtration surface area to maximize dirt-holding capacity and extend the time period between changes or cleaning. Can be washed with clean water to increase effectiveness and lifespan.
|
|
1 Micron Carbon Block 20" x 4.5" Filter Cartridge
4.5 x 20" 0.5 micron nominal, 1 micron absolute carbon block filter cartridge for chlorine filtration, as well as improved taste and odor reduction.
|
|
RainFlo RF4-10C 10 GPM UV Disinfection System
World-leading UV technology. Rated for a 10 GPM (38 LPM) flow rate. Highly effective water disinfection unit designed to ensure quality drinking water is within reach. |
Product Documents: