RainFlo Multifunction Float Switch

RainFlo Multifunction Float Switch
RainFlo Multifunction Float Switch
RainFlo Multifunction Float Switch
Versatile, multifunction control for pump protection, pump control, 3-way valve control and tank water level management.
Our Price$74.95
List Price $89.95
SKU400626
Weight 4
Free U.S. Shipping for orders over $149.00 (excludes Hawaii/Alaska)


Optional Cord Weight
Purchase the RainFlo Cord Weight for Float Switch
RainFlo Weight for Float Switch       RainFlo Float Switch Weight

Product Description:

The RainFlo® Float Switch provides versatile multifunction control for pump protection, pump control, 3-way valve control and tank water level management. Capable of loads up to 16 amps, it provides direct control of pumps up to 1.5 horsepower at 115V or 2 horsepower at 230V and is also suitable for low voltage (12-24VAC/VDC) circuits, valves and controls.

The multifunction float switch and its 30 foot, 16 AWG cord are lead-free and mercury-free and have been tested and certified ROHS compliant for your safety.

Operating as a single-pole, double throw (SPDT) switch, it can be used to protect pumps from running dry, or to add water from an outside source such as a well when the water level reaches a minimum level, or it can be used to activate a pump or valve to drain the tank when the water level reaches a maximum (overflow) level, or it can be used to control a 3-way valve for a backup water supply.

The Normally Open (NO) and Normally Closed (NC) designations refer to the electrical contact state when the float is in the hanging position. The switch changes its state when it reaches approximately 45 degrees up or down.


The Float Switch will Operate in Three Modes:

(1) Auto-fill mode: The switch contacts will be closed when the float is in the hanging position. This is often called a "pump up” or "normally closed” application.

In this application, the float switch is used to activate a pump, relay or valve for the purpose of adding water to the tank from an auxiliary source. This application is used to assure water availability while keeping the tank empty enough to capture rainwater when it becomes available. The float switch cord is secured at the desired low water level threshold.

In auto-fill mode, the Black wire is connected to the AC neutral supply and the Blue wire is connected to the pump, relay or valve’s neutral input. The Brown wire is unused.

(2) Pump protection and auto-drain mode: The switch contacts will open when the float is in the hanging position. This is often called a "pump down” or "normally open” application.

Pump protection application: In this application, the float switch is used to disable power to the pump when the water level reaches a minimum threshold for the purpose of protecting the pump and/or to prevent extraction of the undesirable layer of water at the bottom of the tank.

Auto-drain application: In this application, the float switch is used to activate a continuous-duty relay or valve for the purpose of draining a tank down to a desired water level. This application can be used to drain an auxiliary "first flush” tank which is installed in-line prior to the main storage tank. The float switch cord is secured at the desired low water level threshold.

In both of these applications, the Black wire is connected to the AC neutral supply and the Brown wire is connected to the pump, relay or valve neutral input. The Blue wire is unused.

(3) 3-way valve control: The multifunction capability of this float switch greatly simplifies the control of most electrically actuated 3-way valves. In this application, the float switch controls the valve; applying voltage to the valve’s "rainwater” terminal in the "Up” position, and applying voltage to the "backup supply” terminal in the "Down” position when the tank is empty. Voltage is only applied to one terminal at a time.

In this application, the power supply’s common wire is directly wired to the 3-way valve’s "common” input. The power supply’s other wire is connected to the float switch’s Black wire; the float switch’s Blue wire is connected to the valve’s "rainwater” terminal and the Brown wire is connected to the valve’s "backup supply” terminal. The float switch applies voltage to the Brown wire when the float is hanging (the tank is empty) and applies voltage to the Blue wire when the float is floating (the tank is full). Most 3-way valves have internal limit switches which cut the power once the valve reaches the intended position.


Wiring and Switch Schematic:
Cord Weight Installation Detail:





Product Documents:

RainFlo Float Switch Manual

View RainFlo Float Switch Installation Instructions

Related products you may find useful:

 
Motorized 3-Way Backup Valve
View

Motorized 3-way backup valve to select between primary and secondary water sources, allowing only one at a time.

click to see more

 
 
RainFlo MHP75 3/4 HP Pump
View RainFlo MHP75 Multistage Horizontal 3/4 horsepower pump with durable and quiet performance up to 26 GPM and 65 PSI (maximum).

click to see more

 
 
RainFlo 1.25 HP Universal Rainwater Pump 230V
View High performance RainFlo universal rainwater pump with 1.25" threaded inlet for submersible and external installation.

click to see more

 
 
RainFlo 2 HP Universal Rainwater Pump
High performance universal rainwater pump with stainless steel base and 1.25" threaded inlet for use with a floating filter.


Our Price: $749.95
List Price: $862.00

click to see more

 
High performance universal rainwater pump with stainless steel base and 1.25" threaded inlet for use with a floating filter.


Our Price: $749.95
List Price: $862.00

click to see more

 
RainFlo Float Switch Weight
RainFlo Plastic Float Switch Weight Attaches to a Float Switch to Better Control the Switching Points of the Float Switch Our Price: $8.95
List Price: $9.95

click to see more

 
RainFlo Plastic Float Switch Weight Attaches to a Float Switch to Better Control the Switching Points of the Float Switch
Our Price: $8.95
List Price: $9.95

click to see more

Related products you may find useful:

 
Motorized 3-Way Backup Valve
View

Motorized 3-way backup valve to select between primary and secondary water sources, allowing only one at a time.

click to see more

 
 
RainFlo MHP75 3/4 HP Pump
View RainFlo MHP75 Multistage Horizontal 3/4 horsepower pump with durable and quiet performance up to 26 GPM and 65 PSI (maximum).

click to see more

 
 
RainFlo 1.25 HP Universal Rainwater Pump 230V
View High performance RainFlo universal rainwater pump with 1.25" threaded inlet for submersible and external installation.

click to see more

 
 
RainFlo 2 HP Universal Rainwater Pump
High performance universal rainwater pump with stainless steel base and 1.25" threaded inlet for use with a floating filter.


Our Price: $749.95
List Price: $862.00

click to see more

 
High performance universal rainwater pump with stainless steel base and 1.25" threaded inlet for use with a floating filter.


Our Price: $749.95
List Price: $862.00

click to see more

 
RainFlo Float Switch Weight
RainFlo Plastic Float Switch Weight Attaches to a Float Switch to Better Control the Switching Points of the Float Switch Our Price: $8.95
List Price: $9.95

click to see more

 
RainFlo Plastic Float Switch Weight Attaches to a Float Switch to Better Control the Switching Points of the Float Switch
Our Price: $8.95
List Price: $9.95

click to see more