Tankless pump controllers greatly simplify installation and operation of rainharvesting systems while extending pump life.

When connecting a rainharvesting system to an irrigation system, it is no longer necessary to wire the pump into the irrigation control box. Instead, the pump controller senses the pressure drop when the irrigation valves open and then shuts the pump off shortly after the valves close. A delay is built in to prevent "hammering" - the on/off cycling that happened in the past.

Hose bibs, toilets, urinals, pool top-ups and pond valves are controlled just as easily.

No programming is required. By default, the controller maintains approximately 50 PSI, however, an internal adjusting screw is provided to regulate other pressure level requirements.

This model is specifically designed for 115V pumps.

View Installation Instructions

View Wiring Diagram

View Mounting Example