Simple to Install
The Rain Harvesting Canale Adaptor can be installed in a matter of minutes with minimal tools required.
How to Fit:
- Using a hole saw, drill a 4" hole in the bottom of the canale (or gutter system) allowing for the back of the hole to be 1/2" to 3/4" from the wall
- Temporarily insert the Canale Adaptor to be sure that it will fit correctly
- Remove the adaptor and place a small amount of sealant in the sealant groove under the top lip of the adaptor
- Replace the adaptor into the hole and screw into position
- Slide the downspout assembly up onto the adaptor to complete the installation (the adaptor fits inside 3" and 4" PVC pipe)
Tip: In order to to direct additional rainwater toward the storage system, a 2" sheet metal dam can be built inside the canale - so long as the roof continues to properly drain.