The Econ FP is a peristaltic metering pump that is designed to dose your rainwater with chemicals, such as chlorine, or dye as the water is pumped out to its final destination. The pump features a simple, intuitive design with extremely easy setup. The Econ FP releases a dose of chemical into the water based on the flow of water through the unit. The pump will release up to 16 gallons per day of chemical.
Control Options:
| Water Meter Control: |
Flow Switch Control: |
| The pump accepts input from a pulse water meter with a mechanical read switch. Each time a pulse is received the pump will turn on for anywhere from 0.1 to 60 seconds per pulse. The pump is freely customizable and adjustable to ensure that you are dosing your rainwater with the exact amount of chemical necessary. |
The Econ FP accepts a contact closure from a mechanical flow switch to start and stop the pump. You can configure the Econ FP to any selected speed between 10% and 100% of total capacity when it receives a signal. |
Easy Tube Replacement:
Tube replacement is as easy as 1, 2, 3!
1. Slide the cover up to reveal the rollers and tube.
2. Remove the existing tube, clean the housing, and inspect the rollers.
3. Install the new tube. It's that simple! |
|
| Specifications: |
Dimensional Drawing: |
- Pressure: 80 PSI
- Voltage: 120 VAC
- Maximum Output: 16 GPD
- Power Cord: 6'
- Weight: 4 lbs
- Agency Approvals: UL & NSF 61
|
|
Complete Package Contents:
Documentation:
No recommended products at the moment.
